Telefunken C55U320A4CW-3D, Instruction Manual

English

   - 49 -

Power Up Mode

This setting configures the power up mode preference. 

Last State

 and 

Standby

options are available.

Virtual Remote

Enable or disable the virtual remote feature.

CEC

With this setting you can enable and disable CEC functionality completely. Press Left 

or Right button to enable or disable the feature.

CEC Auto Power 

On

This function allows the connected HDMI-CEC compatible device to turn on the TV 

and switch to its input source automatically. Press 

Left

 or 

Right

 button to enable or 

disable the feature.

Speakers

To hear the TV audio from the connected compatible audio device set as 

Amplifier

. 

You can use the remote control of the TV to control the volume of the audio device.

Smart Remote

Press 

OK

 to open the Smart Remote menu screen. Using this screen you can discover 

and connect the remote controller devices to your TV wirelessly.

Installation Menu Contents

Automatic 

channel scan 

(Retune)

Displays automatic tuning options. 

Digital Aerial:

 Searches and stores aerial DVB stations. 

Digital Cable:

 Searches and stores cable DVB stations. 

Analogue:

 Searches and stores 

analogue stations. 

Satellite:

 Searches and stores satellite stations.

Manual 

channel scan

This feature can be used for direct broadcast entry.

Network 

channel scan

Searches for the linked channels in the broadcast system. 

Digital Aerial:

 Searches for aerial 

network channels. 

Digital Cable: 

Searches for cable network channels.

Analogue fine 

tune

You can use this setting for fine tuning analogue channels. This feature is not available if no 

analogue channels are stored.

Satellite 

Settings

Displays satellite settings. 

Satellite list:

 Displays available satellites. You can 

Add

, 

Delete

satellites or 

Edit

 satellite settings on the list. 

Antenna installation:

 You can change satellite 

anntenna settings and/or start a satellite scan. 

SatcoDX:

 You can upload or download SatcoDX  

data using the related options.

Installation 

Settings

Displays installation settings menu. 

Standby Search (Optional): 

Your TV will search for new 

or missing channels while in standby. Any new found broadcasts will be shown.

Clear Service 

List

Use this setting to clear channels stored. This setting is visible only when the 

Country

 option 

is set to Denmark, Sweden, Norway or Finland.

Select Active 

Network

This setting allows you to select only the broadcasts within the selected network to be listed 

in the channel list. This feature is available only for the country option of Norway.

First time 

installation

Deletes all stored channels and settings, resets TV to factory settings.