English
- 22 -
To change source:
Press the middle of the button
twice (for the second time in total), the source list will
appear on the screen. Scroll through the available
sources by pushing the button up or down.
To turn the TV off:
Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.
Notes:
•
If you turn the TV off, this circle starts again
beginning with the volume setting.
•
Main menu OSD cannot be displayed via control
buttons.
Operation with the Remote Control
Press the
Menu
button on your remote control to
display the main menu screen. Use the
Left
or
Right
button to select a menu tab and press the
OK
to enter.
Use
Left / Right / Up / Down
buttons to select or set
an item. Press
Return/Back
or
Menu
button to quit
a menu screen.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source
button on your remote control consecutively
to select the different inputs.
Changing Channels and Volume
You can change the channel and adjust the volume
by using the
/-
and
Pro/-
buttons
on the remote.
“
” , switch is used for turning the TV on or off.
Inserting the Batteries into the Remote
Lift the cover on the back of the remote upward
gently. Install two
AAA
batteries. Make sure to
match the + and - ends of the batteries in the
battery compartment (observe the correct polarity)
Replace the cover.
Connect Power
IMPORTANT
: The TV set is designed to operate on
220-240V AC, 50 Hz
socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna/Cable/Satellite Connection
Connect the aerial or cable TV plug to AERIAL INPUT
(ANT-TV) or satellite lead to LNB INPUT(ANT SAT)
socket located on the rear bottom side of the TV.
Notiication
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
“HDMI, the HDMI logo and High-Deinition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”
