English
Connecting to a Wireless Network
To make your modem’s SSID visible, you should
change your SSID settings via modem’s software.
The TV cannot connect to the networks with hidden
SSID.
For connecting to a wireless LAN network, you
should perform the following steps:
1.
Connect broadband ISP connection ethernet
cable to the ETHERNET INPUT of your
modem.
2.
Ensure that Nero Media Home software is
installed to your PC (for DLNA function).
3.
7RFRQ¿JXUHZLUHOHVVVHWWLQJVSOHDVHUHIHU
Network Settings
section in the following
sections.
Broadband ISP
Connection
$ :LUHOHVV1 URXWHU ,((( DEJQ ZLWK
simultaneous 2.4 and 5 GHz bands designed to
increase bandwidth. Optimized for smoother and
faster HD video streaming, file transfers, and
wireless gaming.
8VH/$1FRQQHFWLRQIRUTXLFNHU¿OHVKDULQJEHWZHHQ
other devices like computers.
The frequency and channel differ depending on the area.
The transmission speed differs depending on the
distance and number of obstructions between the
WUDQVPLVVLRQ SURGXFWV WKH FRQ¿JXUDWLRQ RI WKHVH
SURGXFWVWKHUDGLRZDYHFRQGLWLRQVWKHOLQHWUDI¿F
and the products that you use. The transmission
may also be cut off or get disconnected depending
on the radio wave conditions DECT phones, or any
other WiFi 11b appliances. The standard values of
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.
The location where the transmission is most effective
differs depending on the usage environment.
<RXFDQSOXJ\RXUZL¿GRQJOHLQWRWKHVXSSOLHG86%
extension cable In cases where network quality is poor
DQGWKHZL¿GRQJOHQHHGVWREHSODFHGWRDORFDWLRQ
with better signal quality.
:LUHOHVVIHDWXUHRIWKH79VXSSRUWVDEJ
n type modems. It is highly recommended that you
VKRXOGXVH,(((QFRPPXQLFDWLRQSURWRFRO
in order to avoid any possible problems while
watching videos.
Use the other usb input, if you experience problems
with audio/video performance.
You must change your modem’s SSID when there
are any other modems around with the same SSID.
&RQ¿JXULQJ:LUHG'HYLFH6HWWLQJV
If you are connecting the TV via ETHERNET INPUT,
select Network Type as
Wired Device
WRFRQ¿JXUH
Network Type
Network type can be selected as
Wired
or
Wireless
device, in accordance with the active connection to the
TV set. Select this as Wired if you have connected to the
TV a LAN cable. Select as Wireless if you connect via
the wireless USB dongle.
&RQ¿JXUDWLRQ6WDWXV
This section displays the status of the connection.
IP Address
If an active connection is available, the IP address will
EHGLVSOD\HGRQWKLVVHFWLRQ,I\RXZDQWWRFRQ¿JXUH,3
address preferences, press
GREEN
button and switch
to the advanced mode.
&RQ¿JXULQJ:LUHG1HWZRUN6HWWLQJVLQ
Advanced Mode
While in Advanced Mode, press
RED
button to edit
settings. When finished, press
OK
to save, Press
RETURN
/
BACK
to cancel.
Wi-Fi feature can be used for a wireless network
connection.
7RHQDEOH:L)LIHDWXUHSUR¿OHVVKRXOGEHFRQ¿JXUHG
properly.
Press
YELLOW
button to scan wireless network.
Afterwards, available network list will be displayed.
Please select your desired network from the list.
If the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via
navigation
buttons
and
OK
button on the remote control.
Wait until the IP the address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network, you should highlight
&RQ¿JXUDWLRQ6WDWXV
and press
OK
.
