English
- 89 -
Initial Settings
When the TV set is operated for the fi rst time,
the IDTV turns on fi rst.
Because this is the fi rst time the TV is used,
there are no channels stored in the memory.
When the TV is turned on for the fi rst time, the
menu for the language selection appears on the
screen. The message “Welcome please select
your language!” is displayed in all language
options sequentially in the OSD.
By pressing the “ ” or “ ” buttons highlight the
language you want to set and press OK button.
After then, “First time installation” OSD will
appear on the screen. By pressing “ ” or “ ”
buttons, select the country you want to set and
press
OK
button (* for EU countries).
Note: Country selection OSD will not be available for UK.
After then, the active antenna selection OSD
appears on the screen:
By pressing “ ” or “ ” buttons, set active
antenna mode as on or off.
If an active antenna is connected to your TV,
you can select this option as On. Antenna
power should be “Off” when standard antenna
is used instead of the active antenna. See
Confi guration Menu in the following sections
for more information.
Press OK button on the remote control to
continue and the following message will be
displayed on the screen:
To start installation process, select “Yes”, to
cancel select “No”.
• To select the “Yes” or “No” option, highlight the
item by using “ ” or “ ” buttons and press the
OK button.
After then, the following OSD will be displayed
on the screen:
If you select
CABLE
option, the following screen
will be displayed:
You can select frequency ranges from this
screen. For highlighting lines you see, use “
” or “ ” button. You can enter the frequency
range manually by using the numeric buttons
on the remote control.
• After this operation, you can set Search Step
as 8000 KHz or 1000 KHz. If you select 1000
KHz, the Tv will perform search process in
a detailed way. Searching duration will thus
increase accordingly. When fi nished, press
OK
button to start automatic search. Automatic
searching screen will be displayed during the
process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
If you select
AERIAL
option from the Search
Type screen, the digital television will search
for digital terrestrial TV broadcasts:
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 89
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 89
05.10.2009 20:12:54
05.10.2009 20:12:54
