Setting the alarm
•
In clock mode press and hold
CLOCK
to
enter the alarm setting mode.
to select the alarm number (
AL1 - AL4
).
•
Rotate the volume knob to
•
This device supports up to
4
alarms
.
Operations are as follows:
•
Once the alarm setting is finished, press
the
CLOCK
button to
confirm
.
An alarm
indicator
will appear on the screen.
Instruction manual
5
Hour digits will flash. Rotate the volume knob to
adjust the hour setting.
•
Press
the
MODE
button
.
Minute
digits will flash. Rotate the volume knob
to adjust the
minute
setting.
•
Press
the
MODE
button
again
.
•
If you want to cancel the alarm,
press
and hold the NEXT button.
Alarm
indicator
s
will disappear from the screen.
• When the alarm time comes, the signal will
sound if no button is pressed.
Press any
button to stop the ringing.
• When the alarm is on, press
the
PLAY/PAUSE
button to interrupt the
alarm signal. After
5
minutes the alarm
will be on again.
Radio
•
To
automatically scan and save
radio stations press and hold
PLAY/PAUSE
on the unit or
FM/SCAN on the RC. The unit
will scan and save up to 50 stations and
save them as P01, P02, P03... P50.
•
Press NEXT or PREVIOUS to switch
to the next or previous radio station. Press and
hold these buttons to go to the nearest station
without saving.
•
Press the MODE button to select the
the radio mode. The display will show
the current frequency and the FM icon
will light on.
• Press
and hold STANDBY to power on
the unit.
•
Press
the
PLAY/PAUSE buttons to mute
or unmute the radio.
•
You can use the numeric buttons on the
remote control to directly input the frequency of
your favorite station.
For example, by pressing
0901 on the RC the unit will go to 90.1 MHz.
Press EQ/SAVE on the RC to save the station.
USB/SD operation
•
Insert a USB device into the USB port or
insert a memory card into the memory card
slot. The unit will start reading the device.
Press
MODE
button to select among USB
and SD modes, if several storage devices are
inserted.
Sleep t
imer
•
After setting the time you can
press
and hold
the
MODE button to select
the sleep
time period
. Sleep time will
appear on the display.
Rotate the knob
to
s
elect the sleep time period (
1
5
-120
minutes) or switch it off. The
unit
will turn off
automatically after the sleep time period
elapses.
•
Once the date, time and sleep
timer are all set, press the
CLOCK
button
to exit the setting mode or wait 10 seconds.
•
You can rotate the FM scan knob
to fine tune the radio frequency.
