Telefunken TF-CSRP3501B, Instruction Manual

Instruction manual

5

Radio operation

• Press the FUNCTION button to select

the Radio mode.

• Press the SKIP+ or SKIP- buttons

to adjust the radio frequency to your desired 
position.

• Press and hold the SKIP+ or SKIP-  

buttons to automatically search the next or 
previous radio station with a strong signal.

Antenna

• This appliance has a FM antenna

located at the back. Fully extend the antenna 
for a better signal reception.

CD/MP3 operation

‡

Press the FUNCTION button to select the
CD mode.

‡

Open the CD compartment at the top.

Insert a CD/MP3 disc, close the CD door, wait 
a few seconds, the player will play the first 
track and the LCD will display the total 
number of tracks.

‡

Press PLAY/PAUSE button to pause

playback. Press the button again to 
resume playback.

• Press repeatedly SKIP+/SKIP- 

buttons to go to a next or a previous track. 

Press and hold these buttons for backward 

or forward searching; release the button for 

normal playback.

‡

During the playback press MODE.

With each press the unit will repeat: one 
track, folder (for MP3 discs), all tracks or 
random track,

‡

To program playback, stop it first,

then press 

MODE

. Use SKIP+/SKIP- 

buttons to select your desired track and 
press 

MODE

 again to confirm. Repeat this 

for other tracks. Press 

PLAY

 to play the 

tracks in the programmed order. Press 

STOP

 twice to cancel the programmed 

playback. 

Stereo reception

• If a radio signal is weak and there are

abnormal noises, we recommend to receive 
the FM signal in mono mode. Press the ST 
button to switch between mono and stereo. ST 
is shown on display when stereo is selected.

Storing and recalling radio stations

• To recall a saved preset station

press the M+/ M-/ STOP button to select your 
preset station, the display will show “PXX”, 
press the M+/ M-/ STOP button again to go to 
a next preset radio station, press and hold the 
M+/ M-/ STOP button over 2 seconds to go to 
a previous preset radio station.

• Press the SKIP- or SKIP+

button to select a different memory preset. 
Press the MODE button again to confirm. 
Up to 30 stations can be preset.

• If you want to store a radio station

in memory, first select the station you want to 
store, next press the MODE button. "P01" will 
start blinking, meaning that the station will be 
stored as Preset 1.

Auto search

• Press and hold the 

SEARCH

 button

to automatically search and store all available 
radio stations (up to 30).

• Press the M+ button

to select a preset radio station.