5
Instruction manual
5
in this case they are not adjustable. The menu
in your unit may be changed without prior
notice and hence be different from the menu
described below.
General system setup
• Date/time: set the current month, year,
day, hour and minute and the date display
mode by pressing kursor button to the left/right
and pressing OK button to select an item.
• Car NO: set your car license plate number
by pressing cursor buttons and pressing OK
button to confirm or press M button repeatedly
to turn this feature off.
• Auto Power Off: Off/1m/3m/5m/10m:
select the time period after which the unit will
automatically switch off or disable this function.
• Beep Sound: enable or disable beeping
sounds when pressing buttons on the unit.
• Delay Off: Off/15s/1m/3m/5m/10m/20m:
select the time period after switching the car
ignition off when the unit will continue recording
or disable this function.
• Language: select the system language.
• TV Mode: NTSC/PAL.
• Frequency: 50 Hz/60 Hz.
• Lamp Setting: Off/On/Auto: turn the lamp
light on/off or set it to Auto.
• Backlight: Off/1m/3m/5m: select the period
of screen backlight.
• Format: select this option to format the
inserted SD card. WARNING: all data on the
card will be deleted.
• Default Setting: select OK to reset all
settings to default values.
• Version: check the current firmware
version info.
Video setup
• Resolution: select video resolution:
1080FHD1920x1080/720P1280x720/
WVGA848x480/VGA 640x480.
• Loop Recording: Off/3 minute/5 minute/10
minutes. Select the maximum record cycle
time.
• WDR: Off/On. Activate or deactivate the
Wide Dynamic Range (WDR) feature.
• Exposure: adjust the image exposure.
• Motion Detection: Off/On. Activate or
deactivate the motion detection function.
• Record Audio: Off/On. Activate or
deactivate recording of sound for video
recording.
• Date Stamp: Off/On. Enable or disable
the display of the current date on the recorded
video.
• GSENSOR: Off/High/Medium/Low. Adjust
the G-sensor sensitivity or turn this feature off.
Photo setup
• Capture Mode: Single/2S Timer/5S
Timer/10S Timer. Select the delay period after
which the photo will be taken automatically.
• Resolution: 12М/8М/5М/3М/1.3М. Select
the size and resolution of the image.
• Sequence: Off/On. Activate or deactivate
sequential image capture.
• Quality: Fine/Normal/Economy. Select the
image quality.
• Sharpness: Soft/Normal/Strong. Select the
image sharpness mode.
• White Balance: select the white balance
mode: Auto/Daylight/Cloudy/Tungsten/
Fluorescent.
• Color: Color/Black & White/Sepia. Select
the color mode
• ISO: Auto/100/200/400. Adjust ISO
sensitivity.
• Exposure: adjust the image exposure.
• Anti-Shaking: Off/On. Enable or disable
the anti-shaking feature.
• Date Stamp: Off/Date/Date Time. Activate
or deactivate showing of date on the photo.
Playback mode setup
• Delete: Delete Current/Delete All. Select
“OK“ to delete or “Cancel“ to cancel.
• Protect: Lock Current/Unlock Current/Lock
All/Unlock All. Enable or disable the protection
of files from manual deleting or overwriting.
• Slide Show: 2 seconds/5 seconds/8
seconds. Select the period of showing the
photo on the display during slide show.
Summary of Contents for TF-DVR12HD
Page 14: ......