Telefunken TF-DVR24HD, Instructions Manual

5

Instruction manual

5

automatically switch off or disable this function.

• Beep Sound: enable or disable beeping

sounds when pressing buttons on the unit.

• Delay Off: Off/30s/1m/3m: select the time

period after switching the car ignition off when 
the unit will continue recording or disable this 
function.

• Language: select the system language.
• TV Mode: NTSC/PAL.
• Frequency: 50 Hz/60 Hz.
• Lamp Setting: Off/On: turn the infrared

lights on or off during recording in dark 
envinronments.

• Backlight: Off/1m/3m/5m: Select the time

period after which the unit will automatically 
switch off the screen backlight.

• Format SD card: select this option to

format the inserted SD card. WARNING: all 
data on the card will be deleted.

• Default Setting: select OK to reset all

settings to default values.

• Version: check the current firmware

version info.

Video setup

• Resolution: select video resolution:

1080FHD  1920x1080/720P1280x720/
WVGA848x480/VGA 640x480.

• Loop Recording: 

1min

/

2

 min/

3 min

Select the maximum record cycle time.

• Exposure: adjust the image exposure.
• Motion Detection: Off/On. Activate or

deactivate the motion detection function.

• Record Audio: Off/On. Activate or

deactivate recording of sound for video 
recording.

• Date Stamp: Off/On. Enable or disable

the display of the current date on the recorded 
video.

• GSENSOR: 

2G/4G/8G

. Adjust

the G-sensor sensitivity or turn this feature off.

Photo setup

• Capture Mode: Single/2S Timer/5S

Timer/10S Timer. Select the delay period after 
which the photo will be taken automatically.

Select the size and resolution of the image.

• Sequence: Off/On. Activate or deactivate

sequential image capture.

• Quality: Fine/Normal/Economy. Select the

image quality.

• Sharpness: Soft/Normal/Strong. Select the

image sharpness mode.

• White Balance: select the white balance

mode: Auto/Daylight/Cloudy/Tungsten/
Fluorescent.

• ISO: Auto/100/200/400. Adjust ISO

sensitivity.

• Exposure: adjust the image exposure.
• Anti-Shaking: Off/On. Enable or disable

the anti-shaking feature

• Quick Review: Off/2 seconds/5 seconds.

Select a period of showing the photo on the 
display after it was taken.

• Date Stamp: Off/Date/Date Time. Activate

or deactivate showing of date on the photo.

Playback mode setup

• Delete: Delete Current/Delete All. Select

“OK“ to delete or “Cancel“ to cancel.

• Protect: Lock Current/Unlock Current/Lock

All/Unlock All. Enable or disable the protection 
of files from manual deleting or overwriting.

    •  Resolution: Select [12M (4000*3000) 
change to 12M

（

4032*3024

10M (3648*2736) / 

8M (3264*2448) /5M (2592*1944) / 

3M (2048*1536) / 2MHD (1920*1080) / 

1.3M (1280*960) / VGA (640*480) ]

Videoresolution 1080FHD/P reached by 
interpolation