English
- 65 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can make the connection via HDMI. When you
connect to DVD players as illustrated below, select the source as HDMI. See section “Input
Selection”.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video
cable to connect to the video input. For enabling audio, use a component audio cable as
illustrated below. When the connection is made, select the source as YPbPr. See section “Input
selection”.
• You may also make connections through the SCART 1 or SCART 2 sockets. In this case, use
a SCART cable as shown below.
Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
HDMI
inputs
Scart sockets
Component
video
inputs
Component
audio
inputs
DVD Player
REAR VIEW
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 14
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 14
26.09.2009 17:00:27
26.09.2009 17:00:27
Summary of Contents for TF3236HX880LU
Page 2: ......
Page 3: ...50156446...
