English
- 52 -
Switching On/Off
To Switch the TV On
Connect the power cord to the 220-240V AC, 50 Hz.
•
Then the standby LED lights up (The led will blink
during the standby On/Off).
To switch on the TV from standby mode either:
•
Press the “
•
” button,
CH
or
CH
or a numeric
button on the remote control.
Press the control switch right side of the TV. The
•
TV will then switch on.
Note
: If you switch on your TV via
CH
or
CH
buttons on the remote control or on the TV set,
the programme that you were watching last will be
reselected.
By either method the TV will switch on.
To Switch the TV Off
Press the “
•
” button on the remote control or hold
the control switch on the Tv until shut down , so the
TV will switch to standby mode.
To power down the TV completely, unplug the
•
power cord from the mains socket.
Note
: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “
SOURCE
” button on your remote control
consecutively for directly changing sources.
Note:
YPbPr mode can be used only when you
connect a device that has a YPbPr output through the
PC input with YPbPr to PC cable (not supplied).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
You can move the control switch upward or
•
downward for changing the volume. To increase
volume, please move the switch upward. Move the
switch downward to decrease the volume. A volume
level scale (slider) will be displayed on the screen.
Programme Selection
First press the control switch once to change
•
channel. You can move the switch upward to select
the next programme or move it downward to select
the previous programme.
Viewing Main Menu
Menu screen cannot be displayed by using the
•
control switch.
AV Mode
Press the control switch consecutively until the
•
source OSD is displayed on the screen.
Operation with the Remote Control
The remote control of your TV is designed to control
•
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Volume Setting
Press “
•
V
” button to increase the volume. Press “
V
”
button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press
•
CH
button to select the previous
programme.
Press
•
CH
button to select the next programme.
Programme Selection (Direct Access)
Press numeric buttons on the remote control to select
•
programmes between 0 and 9. The TV will switch
to the selected programme. To select programmes
between, press the numeric buttons consecutively.
When the pressing time is due for the second
numeric button, only the first digit programme will
be displayed. Press directly the programme number
to reselect single digit programmes.
(optional)
Summary of Contents for TFL2201MDV
Page 2: ...www vestel france fr...
Page 78: ...50194045...
