TX Bluetooth
78
D. Remote access
Remote access allows you to operate your answering machine and listen to your messages by
calling your phone from another phone.
To set the remote access /change remote access code
1. In standby mode,
MENU/OK
then
UP/DOWN
to select
Answering sys
.
2. Press
MENU/OK
then
UP/DOWN
to select
Ans sys setup
.
3.Press
MENU/OK
then
UP/DOWN
to select
Remote access.
4. Press
MENU/OK
then
UP/DOWN
to select
On
or
Off
.
5. Press
MENU/OK
to confirm.
If you set the remote access ON
：
- Press
MENU/OK
. Use the keypad to enter the old 4-digit PIN (default 4-digit PIN is
0000).
- Press
MENU/OK
. Use the keypad to enter the new 4-digit PIN.
- Press
MENU/OK
to enter the new 4-digit PIN again.
- Press MENU/OK to confirm.
To remotely access your answering system
1. Dial your phone number, when you hear your outgoing message, press * and then enter
your 4
–digit Remote Access PIN when outgoing message is still playing.
2. If you enter the incorrect PIN code for 3 times, your phone will hang up automatically.
3. When you have accessed your phone, you can use the keypad to operate your answering
machine.
4. Press the keys below to perform the following functions:
Keys
Description
During Message Playback
Message is not playing
1
Play the remote access menu
2
Stop playing messages
Play messages
4
Press once to repeat playing the
current
message
from
the
beginning. Press twice to skip
backward to the previous message.
5
Delete the current message
6
Skip forward
7
Turn on the answering
machine.
9
Turn off the answering
machine.
E. Using the answering machine at the base
Summary of Contents for TX 103
Page 1: ......
Page 84: ...TX Bluetooth 84 ...
Page 85: ...TX Bluetooth 85 ...
Page 86: ...TX Bluetooth 86 ...
