17
7.2.8.2
Restore Config
Move the cursor to “restore config” and enter into it. Then it shows as below:
7.2.9
Version
Move the cursor to “version” and enter into it. Then it shows as below:
7.2.10
Language
Move the cursor to “language” and enter into it. Then it shows as below
(Press ‘up or down’ key to
choose menu, then press the ‘enter’ key to confirm)
:
The system works normally after all above settings.
7.2.11
Error Info
Move the cursor to “error info.” and enter into it. It shows as below:
7.3
Error Info and Shooting
7.3.1
Indicator Status
There are 2 LED indicators on the panel:
1.
“POWER” is power indicator. When switch on, it’s green, which indicates device works
well.
2.
“ERROR” indicates error status when it’s red.
6.1. Reload Config
Please Wait…
6.2. Restore Config
Please Wait…
7. Version
SW: 3.18 HW: 2.15
8. Language
English
9. Error Info.
List Empty