25
Config”, and “Export Config”.
Choose a device at device list.
“Save Config”:
After committing or confirming set configuration, click this button to save all
configuration into “FLASH” (storage); you do this by front panel.
“Restore Cong.”:
renew and start using the configuration. You can read the renewed
configuration by clicking “refresh” or “parse” on operation interface. Please click “Save Config”
if it needs to be saved.
“Reload Config”:
reload and use the configuration saved in FLASH. This function is usually
used after “import config”, and the new configuration is effective without restarting the device.
“Import Config”:
import configuration of “export config” into FLASH; the imported config can
be used after ‘reload config’ or restart the device.
First please choose the config you want to import, and click “Erase” to clear current config and
then import config from FLASH. At this moment, the config cannot be used. You need restart the
device or click “Reload Config” to start new config.
“Export Config”:
fetch the device’s configuration to local disk (computer). You can import this
configuration when it needs to renew the configuration or to use a back-up device in future.