PROPRIETARY
Chapter
2
Installation
2-1. General
This Chapter provides the information needed to install FP310RAM-X mini readers.
The information presented in this Chapter is organized as follows:
Installation requirements – Section
2-2.
Installation guidelines – Section
2-3.
Installation procedures – Section
2-4.
Before starting the installation procedures, make sure to review the
Safety Information
section at the
beginning of this chapter.
2-2. Installation Requirements
2-2.1 Integration in Systems
Figure 2-1 shows the connections needed to integrate an FP310RAM-X unit in a typical electronic vehicle
identification system. Use the information appearing in Chapter 1 and Appendix A that covers the
FP310RAM-X interface characteristics and connection data, to prepare cables in accordance with the
specific requirements of each location.
i/o
To i/o DEVICE
DC IN
HOST
FP-
3
00RAM-X
To Host Computer
To DC Power Source
(9 - 30V)
Antenna
ANT
Figure 2-1. FP-310RA Connections
2-2.2 Safety Considerations
In addition to the electrical connections shown in Figure 2-1, the FP310RAM-X case must be connected to
protective grounding. Protective devices, complying with the applicable international standards and the
national and local regulations, must be used on all the lines connected to the FP310RAM-X, to protect
against lightning discharges and accidental contact with high-voltage lines.
Summary of Contents for FP310RAM-X
Page 21: ...PROPRIETARY...
