Remote Control Touch
User Guide
Datum: 10.03.2016
Seite 42 von 57
RCTouch_UserGuide_V2.3.1.doc
Configuration is transferred to the logger.
Note:
If you select [Key Stroke] as the <Event> using a functionkey as <Key>, the trigger ap-
pears on the tab sheet [Functionkeys] on the selected functionkey with the specified
name for the trigger.
If you assign more than one trigger to a functionkey, up to two triggers are displayed.
Beyond that, the display is limited to [MULTIACTION].
Figure 7.8: Functionkeys with complex triggers
To delete a complex trigger, you have two options:
1. Click on the
[Remove trigger]
button in the window <Trigger>
…
2. Open the context menu of the trigger to be deleted with a right-click.
Click on
[Delete Trigger]
…
Figure 7.9: Context menu of a trigger
and click on
[Write to logger]
.
Configuration is transferred to the logger.
Trigger is deleted and disappears from the configuration tree.
Note:
If you delete a trigger that is actuated by the <Event> [Key stroke] with a functionkey as
<Key>, it disappears from the tab sheet [Functionkeys].