Remote Control Touch
User Guide
Datum: 10.03.2016
Seite 19 von 57
RCTouch_UserGuide_V2.3.1.doc
6.1 Layout of the views
All views consist of a window and a dark blue frame.
As the window contents vary depending on the view, they are described in more detail in the
following sections of this chapter.
The dark blue frame contains in all views a header bar on top and, with the exception of the
<Home> view, a tab bar at the bottom.
Header bar
Window
Tab bar
Figure 6.2: Components of the application views
6.1.1 Header bar
In each view the header bar contains:
the designation of the current view and
date and time of the device or the TSL network.
Depending on the operating mode, two representations are possible in the top left corner of the
<Home> view:
1. If you operate the device in standalone mode, the Telemotive logo
and the device
name are shown.
2. If you operate the device in the TSL network, the TSL logo
and the TSL name are
shown.
In the application views, the header bar contains on the left:
the button
respectively
for the side menu,
the icon of the current application (see section 6.2) and