Remote Control Touch
User Guide
Datum: 10.03.2016
Seite 22 von 57
RCTouch_UserGuide_V2.3.1.doc
6.3.2 *Device name n*
Note:
“n” stands for any number of devices
Each device listed on the tab sheet
[Overview]
can be viewed separately on the respectively
named tab sheet.
The window of these tab sheets, with the exception of the Remote Control Touch window, con-
tains the following displays:
Figure 6.5: Tab sheet
“*Device name n*”
Note:
The Remote Control Touch has no internal memory. The memory percentage filled and
protected are therefore not shown on its tab sheet.
6.3.3 Functionkeys
The window of the tab sheet
[Functionkeys]
contains two buttons on the left and ten func-
tionkeys on the right. The function
keys can be assigned “complex triggers” (see
User manual
for the Telemotive System Client
). The name of the complex trigger is shown as text on the
key.
Figure 6.6: Tab sheet
“Functionkeys”
1
Device name
2
Configuration name
3
IP address and subnet mask
4
DHCP mode
5
Terminal IP address and subnet
mask
6
Storage capacity
7
Memory percentage filled
8
Memory percentage protected
9
Device status
10
Error count
[Trigger]
button
Functionkeys
[F1]
to
[F10]
[Record]
button
1
3
6
9
10
5
2
8
7
4
