Remote Control Touch
User Guide
Datum: 10.03.2016
Seite 37 von 57
RCTouch_UserGuide_V2.3.1.doc
7.2.2 Manual adjustment
If you want to adjust the brightness of the screen manually, tap on the blue
[ON]
button under
<Auto Brightness>.
The gray
[OFF]
button is active.
Brightness scale with brightness slider is active.
Swipe the brightness slider to the desired position or
tap on the desired position on the brightness scale.
Brightness is set according to adjustment.
A brief fade-in indicates the new brightness value set in percent.
Figure 7.1: Fade-in after adjusting the brightness
7.3 Adjusting volume
Note:
A tone is produced to simulate the newly set volume. If you
set the volume to “Volume:
0%”, the Remote Control Touch is mute. Its acoustic signals are inaudible.
Navigate to the tab sheet
[General]
in the application
Settings.
Swipe the volume slider to the desired position or
tap on the desired position on the volume scale.
A change in volume is indicated by a tone and at the same time it simulates the new-
ly set volume.
A brief fade-in indicates the new volume value set in percent.
Figure 7.2: Fade-in after adjusting the volume
7.4 Changing application
To reach another application, you have two options:
1. Press the Home button
…
Active LED lights up briefly.
<Home> view appears.
2. Open the side menu (see section 7.6)
…
and tap on the icon of the desired application.