blue PiraT2 / 5E / 5E
User Guide
Datum: 21.09.2016
Seite 18 von 71
blue_PiraT2_UserManual_V2.4.1.doc
6.6.7 Memory Device
This main category has currently eight sub categories. But these functions can only be execut-
ed, if an external memory device is installed. Otherwise the message <Error: No memory device
attached > will be displayed.
Currently there is no difference made between memory card (CF) and USB stick.
Note: Never remove the e
xternal memory before pressing „Safely remove ext. Mem.“.
6.6.7.1
Copy to memory device
In order to copy the recorded data to an external memory you have to perform the following
steps:
1. In the Telemotive System Client under General / External Storage set [Logging on Ex-
ternal Storage] to [Off]
2. Click on the button [Write to logger]
3. Restart the logger.
There are five options available in this sub category:
1. Copy all data
2. Copy data of last 60min
3. Copy data of last 12 hours
4. Copy data of last 24 hours
5. Copy data of last 48 hours
By selecting one of the options and pressing the
[menu]
knob the copy function will be execut-
ed. The progress of the save operation will be displayed on the display. After the copy process
is finished the message < Memory Device success: Data copied > will be displayed for a short
time.
The folder name of the offline data has the format
“Offline_bp2_ext_FW-*current firmware of the
logger*_*serial number of the logger*_*start time of data*_*end time of data*
”. The times are
recorded in the time standard UTC like this: yyyymmdd_hhmmss.
6.6.7.2
Erase memory device
After pressing the
[menu]
knob a verification message will be displayed. With the
[OFF / Esc]
button the process can be aborted, with the
[menu]
knob the blue PiraT2 begins to erase the
memory of the memory device. After completion the message <Memory card successfully
erased> will be displayed.
6.6.7.3
Format memory device
After pressing the
[menu]
knob a verification message will be displayed. With the
[OFF / Esc]
button the process can be aborted, with the
[menu]
knob the blue PiraT2 begins to format the
memory device. After completion the message <Memory device successfully formatted> will be
displayed.
6.6.7.4
Install license
On the external memory card has to be a directory
license
where only one license file has to be
stored.
