Programming the ITS821 IP Telephone Set
Connect your ITS821 to your local area network. The default IP address of your ITS821
is 10.0.0.112. Connect to your set with using a web browser. When the connection is
established, you will see the following page.
Click on the
IP Settings
link. The following page opens.
Adjust, the new IP address, subnet mask, and default gateway IP address according to
your requirements.
If you wish a protected access for connecting your ITS821 next time, edit an account ID
and password.
As the next step, go back to Homepage. Click on the
IP Settings
link. The following
page opens.
In this page, Xymphony IP address field is the IP address of your Telesis IP PBX or
switching system. To remind you, your ITS821 will try to register this IP address.
Note that, you should have already xSIP user programmed in your Telesis IP PBX or
switching system. Each xSIP user in Telesis system has:
•
an account ID
•
an authentication ID
•
a password
Xymphony operating system of your Telesis IP PBX or switching system allows the
password to be minimum 12 character long.
You may contact your local Telesis Dealer for his assistance in programming Telesis
IP PBX or switching system if you would have any difficulties to create an account.
9
