18
6 .5 . USALS Setup
If you are using this receiver in conjunction with an external installation that is equipped
with USALS (Universal Satellite Automatic Location System), you must make the appro-
priate settings under this point .
To ensure the USALS works correctly, you must enter the coordinates (degrees latitude
and longitude) of your location, so that the system can calculate all the motor positions for
the satellites receivable at that location (for more information consult the operating manu-
al of your external installation) .
>
Use the arrow keys up/down to select the item „USALS settings“ and confirm by
pressing OK
>
Use the numeric keys on the remote control to enter the latitude and longitude of
your location, as well as the setting North or South for latitude and East or West
for longitude . Confirm your entry by pressing OK .
>
Then select the line „GotoXX“ and confirm by pressing OK .
The positional values will then be saved in the receiver .
6 .6 . Scanning for programmes
6 .6 .1 . DVB-S Scan
The receiver already has a list of satellite programmes save das part of the factory default
settings . In addition to the existing programmes, you can scan for and save new pro-
grammes . This is a useful feature when new programmes are transmitted via satellite, or
where the receiver is intended to receive programmes from satellites not set as part of the
factory default .
There are various ways of executing a programme scan .
>
Press the
Menu key
to go to the main menu . Use the
arrow keys up/down
to
select the menu item „Installation“ .
>
Use the
arrow keys up/down
to mark the line „DVB-S Scan“, and confirm by
pressing
OK
.
The scan window will be displayed .
BDA TD 2220 HD-Lengl_07_12.indd 18
20.07.12 13:50
