Hold a Call
While a call is connected, place the call on hold.
•
Press the Hold softkey. This holds only the highlighted call on the screen.
•
Press the Hold feature key. This holds all calls that are in a holdable state.
Resume a Call View and resume a held call
•
Press the Resume softkey. This resumes only the highlighted call on the screen.
•
Press the call key that hosts the call to resume. This resumes the call only if it is in the holding
state.
End a Call
End active calls at any time.
To end a held call, resume the call and then end it.
1.
On the Calls screen, highlight the call.
2.
Press the End softkey.
Enable Do Not Disturb
Enable Do Not Disturb (DND) when you don’t want calls to interrupt you. Procedure:
1.
Do Not Disturb.
2.
Press the Enable softkey.
Transferring Calls
Transfer a call to another contact and choose the transfer type you want to use for the call.
1.
Select a highlighted entry on the Calls screen.
2.
Do one of the following:
a.
Press the Trnsfr softkey.
b.
Press the Blind Transfer softkey.
Cancel a Transfer
If a contact doesn’t answer the transfer or if you want to remain speaking with the contact on your line,
cancel the transfer before it completes.
Do one of the following:
•
Select Home.
•
Press Back .
The call doesn’t transfer and becomes active.
| 1.888.808.6111 | www.telesystem.us
8.3.22
