IRIS/SIMPO Repeater TFT - Addressable Fire Alarm Repeater Panel
– Installation & Programming Manual
10
4. INSTALLER PROGRAMMING MENUS
4.1. Common Information
At Access Level 3 the Installer has full rights for entire programming of the Repeater.
To enter the Installer Programming menus, press ACCESS button from the Main Screen and introduce the code for
Access Level 3
– 3333 is the default factory set combination.
Press ACCESS button to change the Access Level.
Enter code for Access Level 3 entry (3333
– by default)
and confirm with OK button.
4.1.1. Functional Buttons for Operation
Button
Description
Confirmation and saving of the entered parameters.
Step back in programming menus. Cancelling the introduced changes.
Enter in additional submenu.
Quick button for exit the programming menus and returning back to Main Screen.
4.1.2. General Information for Text Introducing
The text introducing is via virtual keyboard, presenting access to different type of letters, symbols and numbers. The
virtual keyboard is shown on the screen after pressing an active text field. Up to 40 symbols, including space intervals,
can be entered for a name or other description in the system.
After pressing an active text field in a menu, the screen displays the virtual keyboard.
Latin Letters screen keyboard.
Use the special buttons to switch to different type of letters
or symbols. After entering the text and confirming with
ENTER button you must also save the text with APPLY
button on the respective programming menu.
Press EXIT to reject the entered text and go back to
programming menus.
- Switch to Cyrillic Letters
- Switch to Latin Letters
- Switch to Special Letters
- Switch to Symbols
- Switch to Digits
- Switch between Capital and Small Letters
- Enter (confirmation) button.
- Backspace (delete) button.
