IRIS/SIMPO Repeater TFT - Addressable Fire Alarm Repeater Panel
– Installation & Programming Manual
18
4.2.2. Restore Defaults
In the RESTORE DEFAULTS menu, the Installer can reset the Repeater panel to the factory settings of all the menus.
The language of menus will restore in English. It is necessary to program also the Network and Panel settings to restore
the operation of the Repeater in the network. The memory log file will not reset or cleared, as all records will be saved.
It is recommended, before making a Restore Defaults of the Repeater, to save its current system configuration
as TDF file using ProsTE specialized programming software.
Enter SYSTEM - PROGRAMMING
– RESTORE DEFAULTS menu.
Press YES button to restore to factory settings.
Press NO or EXIT button to cancel.
One started, the Restore Defaults process cannot be
stopped or canceled. When the process is completed, the
Repeater will return to Main Screen at Access Level 3.
4.2.3. Save the Configuration
In this menu the installer performs saving the set Repeater system configuration. The panel will ask for confirmation of
the action.
Enter SYSTEM - PROGRAMMING
– SAVE menu.
Press YES button to save the configuration.
Press NO or EXIT button to cancel.
One started, the Save configuration process cannot be
stopped or canceled. When the process is completed, the
Repeater will return to Main Screen at Access Level 3.
4.3. Maintenance Menus
To enter the Maintenance menus, press SYSTEM (
) button from Main Screen, and then press MAINTENANCE
menu button. The following menus are available for settings.
