Televes DVB-S2 COFDM, User Manual

EN

17

b. Identifi er menu

Some DVB-T receivers can present problems 
receiving transmodulator channels which share 
the same identifi er (

transport_stream_id

). To avoid 

these cases the user can change the following DVBT 
output multiplex identifi ers: 

transport_stream_id

(ts_id), 

network_id

 (n_id) and 

original_network_id 

(on_id).

You can choose 

Auto

 mode (the identifi ers do not 

change) or 

Manual

 mode. 

When switching from Auto mode to Manual the 
identifi ers received by satellite are displayed and 
the user can change them.

NIT IDs

      Auto

IDs Manual

ts_id: 0x04fc

n_id:  0x055f

on_id: 0x055f

c.  Temperature measurement menu

The following menu provides an indication of 
the unit’s 

current temperature

 as well as the 

maximum recorded. The maximum can be reset by 
pressing the key  .

MONITOR

Now:   04

Max:   05

reset

The recommended operating margins are as 
follows:

      • Optimum operation : 

0-6

      • High temperature: 

7-8

      • Excessive temperature: 

9-10

If the maximum recorded is outside the optimal 
range the installation should be adjusted to try to 
lower the temperature.

If the DVBS2-COFDM modules have been installed 
in a housing ref. 5069 and the temperature of one 
of the modules is outside of the optimal operating 
range, the ventilation unit will have to be installed 
ref. 5334. To check whether this change is eff ective 
the maximum can be reset and its value checked 
after a given time.

d. Versions menu

In this menu the user is shown the fi rmware 
versions for the unit and the COFDM (FPGA) 
modulator. 

VERSION

Unit:

1.05

1.04

e. LCN menu

Assign a LCN (Logical Channel Number) (between 
1 and 1023) to the existing services at the output 
(marked as ON or DCY).

LCN

1/4

Fashion TV

        N:0003

LCN

3/4

Soyuz TV

        NO LCN

To change the LCN press keys   and   or  . If 
select  “0000” as LCN will show “NO LCN”.