15
EN
Low Power Consumption (LPC) mode:
LPC mode is a mode in which most of the adapter elements
(A/V tuner, ethernet port, etc…) are cut to decrease the
adapter consumption below 1W.
After 5 minutes in standby mode, the adapter goes
automatically to LPC mode (this function can be
deactivated, see “
Low power consumption
” section).
Note
:
Pressing the standby key while recording does not stop the
recording, the adapter goes to standby until the recording
completion then goes to LPC.
When entering standby, if a recording is scheduled in less
than 5 minutes, the adapter does not go to LPC. As described
above, it will only go to LPC after the recording completion.
When the adapter is in LPC, 5 minutes before the start of
a scheduled record, it goes to standby mode, in which the
recording is possible.
6.4 Teletext
On channels supporting Teletext, press successively
TXT
key to start Teletext:
1. Start broadcast Teletext in full mode.
2. Start broadcast Teletext in transparent mode.
3. Close Tetelext.
Note
:
Teletext subtitles can be accessed on a particular
teletext page (for instance, usually page 888 in France).
6.5 Pop-Ups
6.5.1 Interactive pop-ups
Pop-up windows can be displayed at any time to allow
you to make a choice between alternative behaviors, to
enter information needed by the adapter or to actively
acknowledge a situation.
Interactive pop-ups can be displayed in the following
situations:
Conflict management: A choice has to be made between
a zapping and a recording, or between two or more
schedules.
A recording will start in 3 minutes and there is no proper
storage device connected.
A new recording is scheduled in less than 3 minutes from
“My recordings…Add a schedule” or from the EPG and
there is no proper storage device connected.
Removal of a channel from “All TV” or “All radio” favorites
lists, when this channel is in another favorites list, or a
recording is in progress or scheduled on this channel.
Favorites lists reorder confirmation.
Password input.
File suppression confirmation.
File suppression error: An error as occurred during file
deletion, you have to acknowledge.
Recording lock confirmation.
Storage device ejection confirmation (when recording/
timeshifting/playback in progress).
Formatting confirmation.
Recording in progress while starting formatting.
Formatting progression/result: Pop-up during formatting
progression, and to acknowledge the completion.
OSD positioning instructions: You have to confirm when
OSD is positioned as desired.
Video resolution modification confirmation.
Playback resume: Start from last stopping point/start
from beginning.
Playback stop / end.
System update available: Update/Later.
System update confirmation.
Summary of Contents for ZAS HBB
