19. Back on the
Access Point Setting
screen (Figure 4.9), check the box on the bottom
if the network uses IEEE 802.1x Authentication then choose the type. Click
OK
to
confirm.
20. Back on the
Wireless Networks Setting
screen (Figure 4.8), to select a preferred
network, highlight the desired access point from the ‘
Available Networks’
box and
click
Add
. Configure the access point as steps from 14 thru 19. When this is done
the ‘
Preferred Networks’
box should display the added access point.
21. If there are multiple access points displayed on the ‘
Preferred Networks box’
then
highlight the chosen access point and use
Move Up
and
Move Down
buttons to
prioritize the list. Top of the list has the highest priority.
22. Click on the
Advanced
).
Figure 4.10
Advanced Wireless Setting
23. Choose Networks to access.
24. Check the ‘Automatically connect to non-preferred networks’ box
ONLY IF
the
terminal is allowed to make connection to all the available access points.
25. Click
Close
to confirm, then click
OK
to finish wireless network settings.
►
Wireless Connection Setup is complete here. If there are no other connections to create skip to
.
Dial-up Network Setup
♦
26. Back on the
Network Properties
); To create a dial-up
connection, double click on
Make New Connection
icon.
