Telex BP-1000, Operating Instructions Manual

Latched Mode:

Tap the button once to talk.  The indicator will glow
green.  Tap the button again when finished with a
conversation.

Momentary Mode:

Press and hold the button to talk momentarily.  Release
the button when finished talking.

NOTE:

On the BP-2000, if no headset is connected

when the

Talk

button is pressed, the

Talk

button will

have the same function as the

Chan

button.

5.

Sidetone Control

When using a headset, this control adjusts your own voice
level heard in the headphones.  To adjust the level, tap
the

Talk

button once to turn on the headset microphone.

Then, use a small flat-blade screwdriver to increase or
decrease your voice level while talking into the
microphone.  (This control is accessable by removing one
screw of belt clip.)

6.

Headset Connector

This connector accepts a four-wire Telex® boom-
microphone headset.

7.

Intercom Channel Connectors

On the BP-2000, intercom channels are connected via a
pair of 6-pin connectors (one male and one female).  The
male and female connectors are wired together in parallel,
providing a “loop through” at each connector pin.  Use
one connector to connect to the intercom channel.  Use
the other connector to “daisy chain” a cable to the next
belt pack or other station on the channel.

6