9.
Shielded audio cable. Must have male 3-pin XLR connector at one end for con-
nection to the XP-USPG or XP-4PGM program inputs. Pin-out for program in-
puts is as follows:
Pin 1: common
Pin 2: + program input
Pin 3: - program input
10. Shielded audio cable. Must have male 3-pin XLR connector at one end for con-
nection to the XP-USPG PA output. Pin-out for PA output is as follows:
Pin 1: common
Pin 2: + PA output
Pin 3: - PA output
11. 18" (457 mm) CHANNEL OUTPUT cable, 15-pin Male Dsub to 15-pin Female
Dsub. One supplied with each XP-ES4000A.
Power-Up
Plug in the power cord. The EMS4000 channels power-up identically to channels 1
and 2 of the MS2000. Refer to the MS2000 User Instructions for all power-up infor-
mation. The MS2000 and EMS4000 can be powered up in any order.
Sidetone Adjustments
Use the sidetone adjustment procedure as described in the MS2000 User Instruc-
tions, except substitute channel 3, channel 4, etc. The locations of the MS4000
sidetone trimmers are shown in Figure
3
.
Operation
The EMS4000 channels operate identically to channels 1 and 2 of the MS2000. Re-
fer to the MS2000 User Instructions for all operating information.
1 5
