2.
Press and release the locking mechanism, then lift the P200/P250 to
its raised position as shown in Figure 6.
3.
Plug the Firefly
™
P200/P250 into an AC wall outlet (the
POWER
button will glow).
4.
Audio input can be amplified by the P200/P250 and heard over the
built-in speakers. Connect a stereo or mono audio source, such as
the auxiliary output of an amplifier, a wireless microphone system,
CD player, tape player, VCR or LaserDisc to the
AUDIO IN jack (use
one of the two audio cables shown in Figure 4).
5.
If desired, connect an external amplified, mono or stereo
speaker
system to the
AUDIO OUT jack on the P200/P250.
NOTE: When a cable is plugged into the
AUDIO OUT jack, the built-in
speakers are disabled.
6.
A video source such as a VCR or LaserDisc player can be
connected to the
VIDEO jack on the P200/P250 as shown in Figures
7 and 8, using the composite video cable shown in Figure 4. (If your
video system has S-VHS capabilities, use the cable supplied with
your video system to connect to the
SVHS jack on the P200/P250.)
☞
1
2
3
4
Figure 6. Raising the Firefly
™
P200/P250
User Manual 7
Summary of Contents for Firefly P200
Page 37: ...38109 676 Rev A March 1997 ...