h. Select the option to let Windows
Search for the Best Available Drivers
and click
Next.
i. Select the option to
Specify a Location
and type in
c:\windows
in the
pathway and click
Next.
j. Windows should find the driver and install it. Click
Next
to install the
driver.
Note
the location of the driver is
c:\windows\inf\wdma_usb.inf.
k. After Windows has completed installing the USB Audio Device, click
Finish.
To verify that installation has been completed, open the Device Manager. To
open Device Manager, Click on
Start
,
Settings
,
Control Panel
. In the Control
Panel, double click on the
System
icon. In the
System Properties
, click on the
Device Manager
tab, make sure
View Devices by Type
is selected.
Open the category,
Universal Serial Bus Controllers
, you should see the
USB
Composite Device
. Open the
Sound Video and Game Controllers
and you
should see the
Telex USB Microphone
, or you may see USB Audio Device.
If you have any trouble installing the USB Composite Device, or the USB Audio
Device please contact Computer Audio Technical Support.
2. Configuration
a. In the
Control Panel
, double Click on the
Multimedia
icon. In the
Multimedia Properties, click on the
Audio
Tab.
b. In the Sound Recording Section, there is a window for a
Preferred
Device
. Select Telex USB Microphone\USB Audio Device as your
Preferred Device.
c. Under the word Recording, there is an unlabeled button. The button looks
like a box with a blue microphone in it. Click on the blue microphone.
This will bring up a volume control slider. For a H-531, slide the volume all
the way to the top. For a H-831, adjust the volume a few dashes from the
top. For a M-560 the second or third dash from the bottom is sufficient.
Adjust the volume and then close the volume control slider. You may
have to adjust the volume of your microphone higher or lower depending
on your application.
d. Ensure there is a check in the box titled
Use only preferred devices
.
Click
OK
on the bottom of Multimedia and then close the control panel.
