Troubleshooting Guide
PROBLEM
POSSIBLE SOLUTIONS
Telex logo is displayed on MagnaByte
®
P170/P170v
•
Unit is working properly, but no video source is present.
No image projected from MagnaByte
®
P170/P170v
•
MagnaByte
®
not turned on.
•
MagnaByte
®
not connected to AC wall outlet.
•
AC wall outlet defective.
•
Computer video cable not secure.
•
No video signal from computer.
•
Incompatible video signal from computer.
•
Projector lamp burned out.
No image on monitor
•
Computer or monitor video cable not secure.
•
Monitor power off or disconnected.
•
MagnaByte
®
not connected to AC wall outlet.
•
MagnaByte
®
not turned on.
•
No video signal from computer.
Poor color or no color
•
Adjust bright, tint, and contrast controls.
•
Wrong inverse mode; change
INVERSE
setting.
•
Signal from computer is monochrome.
•
Computer video cable not secure.
•
Select a different color mode using the
PALETTE
function.
•
Adjust room lighting.
Flickering or unstable image
•
Focus needed; use the
FOCUS
control (there are six possible settings).
•
Computer video cable not secure.
•
Incompatible video signal from computer.
•
Addjust the WIDTH control.
Split image or partial image
•
Image alignment needed; use up-down and left-right arrow keys.
•
Incompatible video signal from computer.
24 User Manual