background image

Revision A 

Page 10 of 10 

6/24/09   

Factory Service (North America) 

If factory service is required, ship the unit prepaid in its original carton to: 

Telex Audio Service 
c/o Telex Communications 
8601 East Cornhusker Highway 
Lincoln, NE 68507-9702 U.S.A. 
Tel: 402/467-5321 or 800-553-5992 
Fax: 402/467-3279 

Enclose a note describing the problem along with any other pertinent information and how to contact you.  

Warranty (Limited) 

Telex products are guaranteed against malfunction due to defects in materials or workmanship for a specified period, as 
noted in the individual product-line statement(s) below, or in the individual product data sheet or owner's manual, 
beginning with the date of original purchase. If such malfunction occurs during the specified period, the product will be 
repaired or replaced (at our option) without charge. The product will be returned to the customer prepaid via UPS Ground. 
Exclusions and Limitations: The Limited Warranty does not apply to: (a) exterior finish or appearance; (b) certain 
specific described in the individual product-line statement(s) below, 
or in the individual product data sheet or owner's manual; (c) malfunction resulting from use or operation of the product 
other than as specified in the product data sheet or owner's manual; (d) malfunction resulting from misuse or abuse of the 
product; or (e) malfunction occurring at any time after repairs have been made to the product by anyone other than 
Electro-Voice or any of its authorized service representatives. 
Obtaining Warranty Service: To obtain warranty service, the customer must deliver the product, prepaid, to Telex 
together with proof of purchase of the product in the form of a bill of sale or receipted invoice.  
Incidental and Consequential Damages Excluded: Product repair or replacement and return to the customer are the 
only remedies provided to the customer. Telex shall not be liable for any incidental or consequential damages including, 
without limitation, injury to persons or property or loss of use. 
Other Rights (United States Only): This warranty gives you specific legal rights and you may also have other rights, 
which vary from state to state. 
Telex 2.4GHz Wireless Systems are guaranteed against malfunction due to defects in materials or workmanship for a 
period of one (1) year from the date of original purchase. The Limited Warranty does not extend to cables or cable 
connectors. Additional details are included in the Uniform Limited Warranty Statement. Technical Assistance: 800-392-
3497(U.S. and Canada only)  

ACCESSORIES AND PARTS  

Police Wireless PW24ND 

Model 

Part # 

DESCRIPTION 

PB24ND 

PRD00018003

 

Bodypack transmitter with internal microphone, 
internal Li-ion battery cell, belt clip, no microphone 

PR24ND 

PRD00018002

 

Receiver and recharge station, un-terminated 
connection cable 

TC-24 

302039004 

Optional TX Charger Base for PB24ND 

KT24-ML 

302039007 

Lapel Microphone for PB24ND 

PW24-MI  302039005 

In Car Microphone 

Summary of Contents for PW24ND











Reviews: