Page 2 of 3
8.
Charge Jack
– Used to charge the internal
battery or power the unit directly off a wall
outlet. Accepts a 5.5mm x 2.5mm plug with the
center positive. Must be supplied with a 12VDC
regulated power supply with at least a 400mA
current capacity.
9.
Charge Light
.
a. RED =Beltpack battery is charging.
b. GREEN = Beltpack battery is charged.
10.
Programming Jack
– This RJ-45 jack is used to
update programming in the unit if ever needed.
Operation
When the XO-AP is turned on the power
light will turn green immediately indicating
power. After 20 seconds, the unit will do a
ClearScan of the 802.11 RF channels. It
will then select the clearest channel. After
this is done, the AP active light will start
flashing. The AP is now ready to act as an
access point for XO-1 beltpacks.
8
9
10
