- charging cable
- user manual
Charging
It is recommended to use a charger of output parameters of 5V --- 1A. Charger is not included in the set. Full
charging time of the watch is approximately 2 hours. Open the plug protecting the micro USB port, then
connect the included micro USB cable and connect the device to a power source.
1. Installing the SIM card
Always make sure your watch is turned off before inserting or removing the SIM card. Never insert or remove
the SIM card when the watch is turned on. Open the back cover of the watch by gently prying it at the top and
sides until the latches are unfastened. Then remove the battery, taking care not to damage the battery cables.
Remember its position. Open the micro sim card cover by sliding it slightly to the right, and then insert the SIM
card into the slot in such a way that the sim card chip is facing upwards to the watch screen. Then close the lock
by sliding to the left. Place the batteri in the watch in it original position, then close the back cover by pressing
the latches.
2. First run
After installing the SIM card in the watch and charging the device, you can start it by pressing and holding the
on button.
- After starting, the watch connects to the mobile network.
3. Device control
We operate the device via a touch screen. By sliding your finger on the screen, you can switch between
individual functions and you select a given function by pressing the screen.
Proszę dodać ikony z UI KW-60
