![background image](http://html1.mh-extra.com/html/telit-wireless-solutions/3-990-150-463/3-990-150-463_user-manual_1083592039.webp)
GC868-DUAL EVK2 User Guide
1vv0300803 Rev.1- May 2009
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 39
of 55
15.1 Stand-alone setup
If you need to use the interface out of EVK2 (
Stand-alone
setup
) you have to mount the following
missing components:
•
the SIMCARD Holder ;
•
the ON Button ;
•
the STATUS LED and its load resistance.
15.2 Interface connectors
The following connectors are available:
•
2 male connectors (
30 PTH pins each one: PL101, PL102
), by which it is possible to connect
external devices, user’s application, Telit extension boards, measurements equipment or
other tools;
•
2 female connectors (
40 PTH pins each one: SO101, SO104
), to connect the interface to the
EVK2 mother board circuits (
power supply lines, serial in/out lines, audio in/out lines
);
15.3 Content of the kit
Please check out the contents of your interface kit; if any of the items is missing, please
contact your supplier.
Description
Quantity
GC868-DUAL INTERFACE
1
ASSEMBLED CABLE L–250 RG174
TERMINALS SMA F & MMCX 90 M
1
Table 18