S50 Hardware User Guide
1VV0301505 Rev. 3
Page 9 of 60
2021-05-05
Not Subject to NDA
2.
OVERVIEW
This document provides information on how S50 can be integrated into
customer systems. It addresses hardware specifications of the S50 and
requirements of the hardware environments for the S50
.
Note/Tip: The term S50 is used as an abbreviation and
refers to both, the S50/AI and the S50/AP.
If information is related to dedicated versions, the whole product
name is used.
The S50 is delivered in two different hardware versions:
•
S50/AI: with integrated Bluetooth antenna
•
S50/AP: without integrated Bluetooth antenna and with a 50
Ω
rf
connection on pin.
Note/Tip: The integration of the S50 Bluetooth module
within user application shall be done according to the design rules
described in this manual.
The information presented in this document is believed to be accurate and reliable.
However, no responsibility is assumed by Telit Communications S.p.A. for its use, nor any
infringement of patents or other rights of third parties which may result from its use. No
license is granted by implication or otherwise under any patent rights of Telit
Communications S.p.A. other than for circuitry embodied in Telit products. This
document is subject to change without notice.
