![background image](http://html1.mh-extra.com/html/telit-wireless-solutions/gl865-quad/gl865-quad_hardware-users-manual_1083599007.webp)
GL865 Hardware User Guide
1vv0300910 Rev.1 – 2011-07-22
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 7 of 79
Chapter 2: “Overview” provides an overview of the document.
Chapter 3: “GL865 Mechanical Dimensions”
Chapter 4: “GL865 Module Connections” deals with the pin out
configuration and layout.
Chapter 5: “Hardware Commands” How to operate on the module via
hardware.
Chapter 6: “Power supply” Power supply requirements and general design
rules.
Chapter 7: “Antenna” The antenna connection and board layout design are
the most important parts in the full product design.
Chapter 8: “Logic Level specifications” Specific values adopted in the
implementation of logic levels for this module.
Chapter 9: “Serial ports” The serial port on the Telit GL865 is the
core of the interface between the module and OEM hardware
Chapter 10: “Audio Section overview” Refers to the audio blocks of the
Base Band Chip of the GL865 Telit Modules.
Chapter 11: “General Purpose I/O” How the general purpose I/O pads can
be configured.
Chapter 12 “DAC and ADC Section” Deals with these two kind of
converters.
Chapter
13:
“Mounting
the
GL865
on
the
application
board”
Recommendations and specifics on how to mount the module on the user’s
board.
1.5.
Text Conventions
Danger – This information MUST be followed or catastrophic equipment
failure or bodily injury may occur.