LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 124 of 273
+CNMI - New Message Indications To Terminal Equipment
If
<dcs>
indicates that 8-bit or UCS2 data coding scheme is used or
<fo>
indicates that GSM03.40/23.040 TP-User-Data-Header-Indication
is set (bit 6 of
<fo>
is 1), each 8-bit octet will be converted into two
IRA character long hexadecimal number (e.g. octet 0x2A will be
converted as two characters 0x32 0x41)
Class 2 messages and messages in the message waiting indication group
(stored message) result in indication as defined in
<mt>=1
.
3 - Class 3 SMS-DELIVERs are routed directly to TE using unsolicited result
codes defined in
<mt>=2
. Messages of other data coding schemes result in
indication as defined in
<mt>=1
.
<bm>
- broadcast reporting option
0 - Cell Broadcast Messages are not sent to the
DTE
2 - New Cell Broadcast Messages are sent to the
DTE
with the unsolicited result
code:
(PDU Mode)
+CBM: <length><CR><LF><PDU>
where:
<length>
- PDU length
<PDU>
- message PDU
(TEXT Mode)
+CBM:<sn>,<mid>,<dcs>,<pag>,<pags><CR><LF><data>
where:
<sn>
- message serial number
<mid>
- message ID
<dcs>
- Data Coding Scheme
<pag>
- page number
<pags>
- total number of pages of the message
<data>
- CBM Content of Message
If
<dcs>
indicates that GSM03.38/23.038 default alphabet is used ,
each character of GSM/WCDMA alphabet will be converted into
current TE character set (see +CSCS)
If
<dcs>
indicates that 8-bit or UCS2 data coding scheme is used, each
8-bit octet will be converted into two IRA character long hexadecimal
number (e.g. octet 0x2A will be converted as two characters 0x32 0x41)
<ds>
- SMS-STATUS-REPORTs reporting option
0 - status report receiving is not reported to the
DTE
and messages are stored
1 - the status report is sent to the
DTE
with the following unsolicited result code:
(PDU Mode)
+CDS: <length><CR><LF><PDU>
where:
<length>
- PDU length
<PDU>
- message PDU
Summary of Contents for LE910-SKG
Page 1: ......
