LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 185 of 273
#SCFGEXT2 - Socket Configuration Extended
(#SCFG command 6th parameter old behaviour, start only first time if new data are
received from the serial port)
1 – new behaviour for transmission timer :
Restart when new data received from serial port
Note : is necessary to avoid overlapping of the two methods.
Enabling new method, the old method for transmission timer (#SCFG) is
automatically disabled to avoid overlapping.
Note : check if new data have been received from serial port is done with a
granularity that is directly related to #SCFG <txTo> setting with a maximum period
of 1 sec.
<
abortConnAttempt
> - Enable connection attempt(#SD / #SKTD) abort before
CONNECT (online mode) or OK (command mode)
0 – Not possible to intterupt connection attempt
1 – It is possible to interrupt the connection attempt
(<connTo> set by #SCFG or DNS resoultion running if required)
And give back control to AT interface by reception of a character.
As soon as the control has been given to the AT interface, the ERROR message will
be received on the interface itself.
Note : values are automatically saved in NVM.
<noCarrierMode>
- permits to choose
NO CARRIER
indication format when the socket is closed as follows
0 –
NO CARRIER
(default)
Indication is sent as usual, without additional information
1 –
NO CARRIER:<connId>
Indication of current
<connId>
socket connection identifier
is added
2 –
NO CARRIER:<connId>,<cause>
Indication of current
<connId>
socket connection identifier
and closure
<cause>
are added
For possible
<cause>
values, see also
#SLASTCLOSURE
Note: like
#SLASTCLOSURE
, in case of subsequent consecutive
closure causes are received, the original disconnection cause
is indicated.
Note: in the case of command mode connection and remote closure
with subsequent inactivity timeout closure without retrieval of all
Summary of Contents for LE910-SKG
Page 1: ......
