LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 93 of 273
+CSVM – Set Voice Mail Number
129 - unknown type of number and ISDN/Telephony numbering plan
145 - international type of number and ISDN/Telephony numbering plan (contains
the character "
+
")
AT+CSVM?
Read command returns the currently selected voice mail number and the status (i.e.
enabled/disabled) in the format
+CSVM:<mode>,<number>,<type>
AT+CSVM=?
Test command reports the range for the parameters
<mode>
and
<type>
.
+CACM - Accumulated Call Meter
AT+CACM=
[<pwd>]
Set command resets the Advice of Charge related Accumulated Call Meter stored in
SIM (ACM): it contains the total number of home units for both the current and
preceding calls.
Parameter:
<pwd>
- to access this command PIN2; if PIN2 has been already input once after
startup, it is required no more
AT+CACM?
Read command reports the current value of the SIM ACM in the format:
+CACM: <acm>
where:
<acm>
- accumulated call meter in home units, string type: three bytes of the
ACM value in hexadecimal format (e.g. “00001E” indicates decimal
value 30)
Note: the value
<acm>
is in home units; price per unit and currency are defined
with command
+CPUC
AT+CACM=?
Test command returns the
OK
result code
Reference
3GPP TS 27.007
+CAMM - Accumulated Call Meter Maximum
AT+CAMM=
[<acmmax>
[,<pwd>]]
Set command sets the Advice of Charge related Accumulated Call Meter Maximum
Value stored in SIM (ACMmax). This value represents the maximum number of
home units allowed to be consumed by the subscriber. When ACM reaches
<acmmax>
value further calls are prohibited.
Parameter:
<acmmax>
- ACMmax value, integer type: it is the maximum number of home
units allowed to be consumed by the subscriber.
<pwd>
- PIN2; if PIN2 has been already input once after startup, it is
required no more
Summary of Contents for LE910-SKG
Page 1: ......
