LE910-SKG AT commands reference guide
80437ST10619A Rev.1 – 2014-09-16
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 98 of 273
+CGATT - EPS Attach Or Detach
+CGATT: (0,1)
OK
AT+CGATT=1
OK
Reference
3GPP TS 27.007
+CGEREP - EPS Event Reporting
AT+CGEREP=
[<mode>[,<bfr>]]
Set command enables or disables sending of unsolicited result codes
+CGEV: XXX
(see below) from
TA
to
TE
in the case of certain events
occurring in the
TA
or the network.
Parameters:
<mode>
- controls the processing of
URCs
specified with this command
0 - Buffer unsolicited result codes in the
TA
. If
TA
result code buffer is full,
the oldest one can be discarded. No codes are forwarded to the
TE
.
1 - Discard unsolicited result codes when
TA-TE
link is reserved (e.g. in
on-line data mode); otherwise forward them directly to the
TE
.
2 - Buffer unsolicited result codes in the
TA
when
TA-TE
link is reserved
(e.g. in on-line data mode) and flush them to the
TE
when
TA-TE
link
becomes available; otherwise forward them directly to the
TE
.
<bfr>
- controls the effect on buffered codes when
<mode> 1
or
2
is
entered:
0 -
TA
buffer of unsolicited result codes defined within this command is
cleared when
<mode>=1
or
2
is entered.
1 -
TA
buffer of unsolicited result codes defined within this command is
flushed to the
TE
when
<mode>=1
or
2
is entered (
OK
response shall
be given before flushing the codes)
Unsolicited Result Codes
The following unsolicited result codes and the corresponding events are
defined:
+CGEV: REJECT <PDP_type>, <PDP_addr>
A network request for PDP context activation occurred when the
TA
was unable to report it to the
TE
with a +
CRING
unsolicited result code
and was automatically rejected
+CGEV: NW REACT <PDP_type>, <PDP_addr>, [<cid>]
The network has requested a context reactivation. The <cid> that was
used to reactivate the context is provided if known to
TA
+CGEV: NW DEACT <PDP_type>, <PDP_addr>, [<cid>]
The network has forced a context deactivation. The <cid> that was
used to activate the context is provided if known to
TA
Summary of Contents for LE910-SKG
Page 1: ......
