LE910Cx-WE866Cx LTE Bundling User Guide
1VV0301578 Rev. 11
Page 37 of 67
2021-04-27
Not Subject to NDA
6.
WIRELESS OPERATIONS
This chapter describes the use cases for Wireless operations in the WE866Cx module.
Wi-Fi
6.1.1.
Wi-Fi HotSpot Mode
6.1.1.1.
Accessing Internet through Cellular Hotspot Mode
The WE866Cx module operates in AP mode. The internet connectivity for the Wi-Fi
module is provided via cellular modem.
The Host MCU uses the AT commands to access the internet through the cellular
connection, whereas an external STA can connect to an AP.
The Routing function for the Wi-Fi module is provided by the Linux OS and is orthogonal
to the data AT commands.
Figure 40: Accessing Internet through Cellular Modem
The following example demonstrates how to access the internet through cellular AT
commands:
Step 1: Prepare the WE866Cx module for AP mode by issuing the following AT commands
from Host MCU.
AT+CGDCONT=1,“IP”,“Example_APN”
AT+CGDCONT=2,“IP”,“Example_APN”
AT#DUALAPN=1
Summary of Contents for LE910C Series WE866C Series
Page 67: ......
