LE910Cx-WE866Cx LTE Bundling User Guide
1VV0301578 Rev. 11
Page 54 of 67
2021-04-27
Not Subject to NDA
Once the HTTPS profile is configured, the GET and POST methods can be tested as
explained in section 6.3.1 HTTP Mode Commands.
6.3.3.
HTTP/HTTPS Server Authentication
To enable the basic server authentication, configure the HTTP/HTTPS profile using the
below command
AT#HTTPCFG=102,“server_addr”,“server_port”,1,“username”,“password”,0,120,1
Once the profile has been successfully configured with the server authentication
credentials, the GET and POST methods can be tested as explained in sections 6.3.1 HTTP
Mode Commands and 6.3.2 HTTPS Mode Commands.
Summary of Contents for LE910C Series WE866C Series
Page 67: ......
