LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14
Page 1370 of 1904
2022-03-04
Not Subject to NDA
3.18.10.
AT#FTPOPEN - FTP Connection Opening
This execution command opens an FTP connection toward the FTP server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#FTPOPEN=[<server:port>,<username>,<password>[,<mode>]]
Execution command opens an FTP connection toward the FTP server.
Parameters:
Name
Type
Default
Description
<server:port> string
-
address and port of FTP server
(factory default port 21), in the format:
“ipv4” / “ipv4:port”
“ipv6” / “[ipv6]” / “[ipv6]:port”
“dynamic_name” /
“dynamic_name:port”
<username> string
-
authentication user identification for
FTP
<password>
string
-
authentication password for FTP
<mode>
integer
0
active or passive mode
Values:
0 : active mode
1 : passive mode
In FTP Open case, the solution dependency limits the maximum
time out to 1200 (120 seconds). The FTPTO value that exceed 1200
is considered as 1200.
Summary of Contents for LE910C series
Page 1904: ......