LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14
Page 1558 of 1904
2022-03-04
Not Subject to NDA
Values:
0 : GPIO status LOW
1 : GPIO status HIGH
<param> integer
0
When <paramType>=3, <param> is
the time interval starting when GPIO
pin has the value specified with
<paramType>=2. When the interval
is elapsed and GPIO pin value is
equal to the value previously
specified, the #EVMONI executes
the AT command configured with
<paramType>=0.
Value:
0÷255 : sec
<label>=ADCH1, ADC High Voltage monitoring.
<paramType> can assume values in the range 0 - 3.
Name
Type
Default
Description
<param> integer
1
When <paramType>=1, <param> is
the ADC pin number to monitor.
Value:
1÷max : max dependes on the hardware.
<param> integer
0
When <paramType>=2, <param> is
the ADC High voltage threshold to
monitor.
Value:
0÷2000 : Expressed in mV
Summary of Contents for LE910C series
Page 1904: ......
