LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14
Page 279 of 1904
2022-03-04
Not Subject to NDA
3.2.3.13.
ATS38 - Delay To Before Forced Hang Up
This command sets delay to before forced hang up.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS38=<dalay>
Set command sets the delay, in seconds, between the device's receipt of H
command (or ON-to-OFF transition of DTR) and the disconnect operation.
Parameter:
Name
Type
Default
Description
<dalay>
integer
20
acknowledge timer in units
of seconds
Values:
0÷254 : the device will wait <delay> seconds for the
remote device to acknowledge all data in the
device buffer before disconnecting
255
:
the device doesn’t time
-out and continues to
attempt to deliver data in the buffer until the
connection is lost or the data is delivered
<delay> parameter can be used to ensure that data in device buffer
is sent before device disconnects.
ATS38?
Read command returns the current value of S38 parameter.
The format of the numbers in output is always 3 digits, left-filled
with 0s.
Summary of Contents for LE910C series
Page 1904: ......
