SE867-AGPS User Guide
1VV0300860 Rev. 3 - 2010-05-10
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 51 of 69
or
$PUNV,SET,2D,
2DControlReacquisition_2DControlAll_2DControlCold,AltAidingVal,
StartF
Tim
D,Re
eo
allback
eout2
acqFallbackTim
ut2D
*cc
Name
Format
Valid
values
Default
value
Description
X
N/A
N/A
N/A
N/A
2DControlReacquisition
Hex
0,1
0
Indicates if 2D start-up mode is
enabled in reacquisition:
0 – disabled
1 – enabled
Please see usage example below.
2DControlAll
Hex
0,1
0
Indicates if 2D start-up mode is
enabled in all start modes except
COLD start:
0 – disabled,
1 – enabled
Please see usage examples below.
2DControlCold
Hex
0,1
0
Indicates if 2D start-up mode is
enabled in COLD start:
0 – disabled,
1 – enabled
Please see usage examples below.
AltAidingVal
Decimal
Number
• 20000
100
Altitude aiding value in respect to
geoid (in meters)
StartFallbackTimeout2D
Decimal
Number
≥
0
0
SE867-AGPS tries to produce a 3D
fix at start-up.
If producing a 3D fix is not feasible
within this timeout then fallback to
2D fix is tried if allowed by
2DControl…
ReacqFallbackTimeout2D
Decimal
Number
≥
0
0
SE867-AGPS tries to produce a 3D
fix at reacquisition. If producing a
3D fix is not feasible within this
timeout then fallback to 2D fix is
tried if allowed by
2DControl…
X
N/A
N/A
N/A
N/A
In case of successful execution of
$PUNV,CONFIG,2D,
2DControlReacquisition_2DControlAll_2DControlCold,AltAiding
Val,StartFallbackTimeout2D,ReacqFallbackTimeout2D
*cc
