SE867-AGPS User Guide
1VV0300860 Rev. 3 - 2010-05-10
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 57 of 69
Name
Format
Valid
values
Default
value
(pedestrian)
Default
value
(vehicle)
Description
Position
Threshold
Decimal with
fractional
part
≥
0
0
50
The threshold value for
position jump.
Position pinning will be
disabled if this value is
reached (in meters). Zero
values for position and velocity
thresholds effectively mean
that position pinning is
disabled.
Velocity
Threshold
Decimal with
fractional
part
≥
0
0
1
The threshold value for
velocity calculation. Position
pinning will be disabled if this
value is reached (in meters
per second). Zero values for
position and velocity
thresholds effectively mean
that position pinning is
disabled.
Position
update
timeout
Decimal
>
0
1
120
In position pinning mode,
pinned position is updated
based on this timeout (in
seconds).
Deep mode
delay
Decimal
≥
0
0
600
When in position pinning
mode, deep pinning mode is
activated after this delay (in
seconds). If 0, then deep
pinning mode is disabled.
$PUNV,CONFIG,17,
Position threshold
,
Velocity threshold
,
Position update
timeout
,
Deep mode delay
*cc
command, the receiver sends confirmation in the following form:
$PUNV,CFG_S,17*55
In case of failure of execution of GETCONFIG, CONFIG or SET command the receiver
sends the ERR reply message. Please see the ERR section for details (10.1.2.17).
In case of successful execution of
