WE310F5-I/P Porting Reference Guide
1VV0301733 Rev. 6
Page 30 of 40
2021-10-07
Commands
GS2K
WE310F5
Parameters
GS2K
WE310F5
5. Size of data
6. Send response
status line
7. Send response
headers
not supported)
3) Supported
4) Supported
5) Supported
6) Supported
7) Supported
AT+PSSTBY
Supported
Supported
but change
in supported
parameter’s
1. DELAY TIME
2. ALARM1 POL
3. ALARM2 POL
1. Supported
2. Not supported
3. Not supported
AT+PSDPSLEEP
Supported
Supported
but change
in supported
parameter’s
1. timeout
2. ALARM1 POL
3. ALARM2 POL
1. Supported
2. Not supported
3. Not supported
AT+WEBPROV
Supported
Supported
but change
in supported
parameter’s
1. username
2. passwd
3. SSL Enabled
4. Param StoreOption
5. idletimeout
6. ncmautoconnect
7. dual interface
8. format version
9. ?
1. Supported
2. Supported
3. Not Supported
4. Optional
5. Not Supported
6. Optional
7. Not Supported
8. Not Supported
9. Supported
AT+SOTAFWUPCONF Supported
Supported
but change
in supported
parameter’s
1. Param(0-13)
2. Value
PARAMS:
0 - Server IP
1 - Server Port
2 - Proxy Preset (0|1) (Not
Supported)
3 - Server IP if proxy preset=1 (Not
Supported)
4 - Server Port if proxy preset=1
(Not Supported)
5 - SSL Enable (0|1)
6 - CA Cert Name (Not Supported)
7 - WE310F5-X module Binary
Request URL
8 - Info URL (Not Supported)
9 - Server host name
10 - WE310F5-X module signature
binary request URL (Not
Supported)
11 - Enables or disables domain
name check on incoming
certificate from server.
12 - Client certificate name (Not
Supported)
13 - Client key certificate (Not
Supported)
ATCn
Supported
Supported
but change
in supported
parameter’s
0: Disable
1: Enable
0: Not Supported
1: Supported
Non-supported AT Commands
Table 18: Non-Supported At Commands.